Too big for CCC?

[JPinoy]

My greatest creation and it can't be entered.....

http://www.brickshelf.com/cgi-bin/gallery.cgi?i=608281

http://www.brickshelf.com/cgi-bin/gallery.cgi?i=608283

http://www.brickshelf.com/cgi-bin/gallery.cgi?i=608286

[footsteps]

My greatest creation and it can't be entered.....

http://www.brickshelf.com/cgi-bin/gallery.cgi?i=608281

http://www.brickshelf.com/cgi-bin/gallery.cgi?i=608283

http://www.brickshelf.com/cgi-bin/gallery.cgi?i=608286

Nonsense. I can see space at the bottom where CCC standard wall connections could be added, either as a corner unit or as a wall unit. It is on a 32x32, is it not? Then add the connectors, and yer done!!

Go for it!

Alan

[JPinoy]

Yes its on a 32x32 plate.

Actually its part of a City-State's wall (the 1st of 4 guard towers), which is erm... as big as Lego Castles.... 52 bricks high to the crenellations.

[DaveOhare01]

JP!

Awesome! Of course, it's a bit small for my taste *wink*. REALLY dig the cannon! But, I did not see the interior views in the links you posted, are these ready?

Are you sure you can't enter this? It may not be a CCC Wall or Gate section -- but sure does fit as a house! *grin*

Dave O

[JPinoy]

Those pics are after the interior pics. Just lick on the UP link and you'll see the progression from the tower's base as well as the original smaller design to the complete ones I posted here.

Its the 1st of 4 towers, then the walls sections, the gate houses, the buildings inside of the fortified city-state, the Sea-Fortress guarding the city's harbor, and then the city's center piece... the Tower-Palace. Not specifically in that order of course.