Favorite LEGO piece.

Sir Vincent · Post by **Sir Vincent** » Sun Oct 03, 2004 9:43 pm

What is your favorite LEGO piece? The one piece to rule them all?

I'd say...1x2 bricks...since almost everything I build has at least one of them...

xxbattosaixx · Post by **xxbattosaixx** » Sun Oct 03, 2004 11:22 pm

I'll agree to the 1x2 brick.The brick that started it all....

lil Jon · Post by **lil Jon** » Sun Oct 03, 2004 11:45 pm

My favorite is the gray 1 by 2.

Followed up by black 1 by 1 (great for making tudor houses)

Post by **Formendacil** » Mon Oct 04, 2004 2:21 am

The 1x4 or the 1x6. The 1x2 fills in all the ends, and makes the tops of the crennellations, and 1x1s fill the cracks, but these are the two that I prefer to use the most.

MaxiVisVires · Post by **MaxiVisVires** » Mon Oct 04, 2004 2:55 am

1 x 4 all the way. But just as with everything else, you need all the other bricks to make them work. 1 x 2 and 1x6 in a close 2nd and 3rd.

cnelson · Post by **cnelson** » Mon Oct 04, 2004 3:13 pm

I can't say that I have a favorite piece. A Lego piece by itself is a pretty silly thing; only in combination do they gain value and interest.

I find that I use 1 x 3s and 2 x 3s quite a bit; something in me finds the proportions of odd stud lengths more appealing than even.

I think the pieces that inspire the most creativity in my building are the ones that break the usual grid through either 1/2 stud offsets (I think my castle gatehouse uses more 1 x 2 plates with one stud than any other single part) or SNOT-compatible bricks like the 2 x 2 x 2 bracket and 1 x 1 brick with headlight.

Carl

Post by **rogue27** » Mon Oct 04, 2004 3:45 pm

6 x 5 Plant Leaf (Like in the Forestmen sets)

Jojo · Post by **Jojo** » Mon Oct 04, 2004 7:24 pm

Hello!

My favourite part just for the part being this part itself is currently a trans dark blue 4×8 plate. Don't ask!

Otherwise I like the jumper plate

the best. It's called MOOT-plate (Make-One-Out of-Two-plate, or AZMEP in German (Aus-Zwei-Mach-Eins-Platte)).

Bye
Jojo

xxbattosaixx · Post by **xxbattosaixx** » Mon Oct 04, 2004 10:08 pm

David85 wrote:
xxbattosaixx wrote:I'll agree to the 1x2 brick.The brick that started it all....

Wasn't the 2x4 the brick that started it call.

I like the 1x2, 1x1, 1x4 and 1x6 in white, grey, black, blue, red, sand red, and tan.

You know what I meant.1x2,1x4,same difference.

Stingray · Post by **Stingray** » Thu Oct 07, 2004 12:51 am

I like the Technic half pins with the stud on the end.
1X1 rounds are also well used parts of mine.

Duke_Dave · Post by **Duke_Dave** » Thu Oct 07, 2004 1:24 am

My favorite piece would have to be the Light Grey 2x4 brick. I mean you can't hardly have a cstle without them.

Dave

Post by **Robin Hood** » Thu Oct 07, 2004 1:35 am

I would say my favorite is the 1x2.

Dan

porschecm2 · Post by **porschecm2** » Thu Oct 07, 2004 3:59 am

Ooh...interesting question.

Mine would either have to be the 1x1 technic brick, or the 1x1 brick with studs on 4 sides. Now they just need to make a 1x1 technic brick with holes on 4 sides.

Cm2

LEGOFREAK · Post by **LEGOFREAK** » Thu Oct 07, 2004 4:09 am

I don't have a favorite brick. I like the minifigs the best.Can be any kind, but mostly castle.
Even when I was in the hospitals, I usually had a box of the minifigs around me.